Easy Testing Water Hardness Test Strips Fast and Accurate Water Quality Testing Kit for Water Softener, Swimming Pool, Fish Tank, Spa, and medical testing and analysis of the water specimen.

Uses of Water Hardness Test Strips

Water test strips are made for qualitative and semi-qualitative water quality testing strips. This strip is recommended for the Total Hardness of water. Refer to the box and the bottle label for the specific test parameters of the product that you are using. Carefully read the directions before using The results on the strips can be read visually and instrumentally.

Pack Size: 100 Strips per Bottle.

Testing conditions and ranges

Test your sample at ambient temperature between 20-30C, and relative humidity≤80%. For Drinking water, Pool, Spa, Ponds, Aquarium Industrial waste water, etc.

Important: Storage Instructions

Carefully read the storage instructions and label. Proper storage and handling procedures must be followed to avoid deterioration of the product both during the storage and handling.

• Store in dry condition, keep away from direct sunlight and moisture
• Always keep the cap tight on your strip container in between uses, and always leave desiccant in the bottle.
• Do not touch any areas of the test pad of the reagent strips.
• Do not drink the water sample that the strip was immersed in.
• Use strips before the expiry date.
• Discard the water sample properly.

Instructions of Test

Please follow these instructions to ensure that you obtain proper results.

1. Collect water samples to be tested in a vial, cup, or container.
2. Immerse the test strip in the desired water sample and remove it within 1-2 seconds.
3. Hold the strip horizontally and do not shake excess water from the test strip.
4. Read the test results carefully within 30 seconds in a good light and with the area held near the color chart on the bottle label. Color changes that appear along the edges of the pads or after moving more than 2 minutes have passed are of no significance.